Product Description
This Moisture Resistant (M.R.) Plywood is made with selected seasoned hardwood wood veneers and center core of Eucalyptus wood to give superb nail holding strength and balances the Plywood from any bend or wrap. They are then bonded with Melamine Urea Formaldehyde Glue/ Resin under computer controlled temperature and pressure, bonded face to face with the grain running in alternate directions or cross bonding which gives our material its core strength.
TECHNICAL SPECIFICATIONS –
Prescribed Test- ISI 303 |
Criteria |
Observed Value |
Moisture Content (%) |
5-15% |
8-12% |
Density (Kg/m3) |
Not Specified |
>625 & also available in 800 |
Glue Shear Strength (kg) – Dry |
Min 1350 |
> 110 |
Glue Shear Strength (kg) – Mycological |
Not Specified |
>No delamination after test |
Adhesion of ply |
Not Specified |
Excellent |
Water absorption test |
<2% |
< 2% |
Screw holding strength(kg) |
Min 180 |
> 200 |
Nail holding strength(kg) |
Min 50 |
> 50 |
Static bending strength |
|
|
MoR (N/mm2) |
|
|
Across the grain |
Min 20 |
> 20 |
Along the grain |
Min 40 |
> 40 |
MoE ( N/mm2) |
|
|
Across the grain |
Min 1800 |
> 2000 |
Along the grain |
Min 4300 |
> 4500 |
Preservative treatment |
|
|
Glue line |
NA |
Bioflex chemical treatment |
Finished Panel |
NA |
Colourless preservative |
- Prices and product availability are subject to change without notice.
- Actual products may differ slightly in appearance to image shown.
- The prices mentioned below are of actual thickness, for ex: 7MM means thickness is guaranteed 7+ MM
Reviews
There are no reviews yet.